Toro 4100-D service manual Product Records, Maintenance

Chapter 2

Product Records and Maintenance

Table of Contents

PRODUCT RECORDS . . . . . . . . . . . . . . . . . . . . . . . . . 1

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

EQUIVALENTS AND CONVERSIONS . . . . . . . . . . . 2

Decimal and Millimeter Equivalents . . . . . . . . . . . . 2

U.S. to Metric Conversions . . . . . . . . . . . . . . . . . . . 2

TORQUE SPECIFICATIONS . . . . . . . . . . . . . . . . . . . 3

Fastener Identification . . . . . . . . . . . . . . . . . . . . . . . 3

Using a Torque Wrench with an Offset Wrench . . 3

Standard Torque for Dry, Zinc Plated and

Steel Fasteners (Inch Series) . . . . . . . . . . . . . . . 4

Standard Torque for Dry, Zinc Plated and

Steel Fasteners (Metric) . . . . . . . . . . . . . . . . . . . . 5

Other Torque Specifications . . . . . . . . . . . . . . . . . . 6

Conversion Factors . . . . . . . . . . . . . . . . . . . . . . . . . 6

Product Records

Insert Operator’s Manual and Parts Catalog for your Groundsmaster 4100--D at the end of this chapter. Refer to Operator’s Manual for recommended maintenance intervals. Additionally, insert Installation Instructions, Operator’s Manuals and Parts Catalogs for any acces- sories that have been installed on your Groundsmaster at the end of this section.

Maintenance

Maintenance procedures and recommended service in- tervals for the Groundsmaster 4100--D are covered in the Operator’s Manual. Refer to that publication when performing regular equipment maintenance. Several maintenance procedures have break--in intervals identi- fied in the Operator’s Manual. Refer to the Engine Oper- ator’s Manual for additional engine specific maintenance procedures.

Product Records and Maintenance

Groundsmaster 4100--D Page 2 -- 1 Rev. A Product Records and Maintenance