Toro 4100-D service manual Deck Manifold Service, RH Wing Deck PTO Manifold Shown

Deck Manifold Service

5 ft--lb	8	20 ft-lb
		(27 N-m)
(6.7 N--m)
	7	9
20 ft-lb		25 ft-lb
		(34 N-m)
(27 N-m)	6	10
		11	25 ft-lb
5			(34 N-m)
20 ft-lb
(27 N-m)
		1
50 ft-lb
(67 N-m)
	4		20 ft-lb
			(27 N-m)
		2
RH WING DECK PTO MANIFOLD SHOWN		3

Figure 86

1.	Manifold body	5.	Relief valve (port RV2)	9.	Relief valve (port RV1)
2.	NWD SAE #4 plug with O-ring	6.	Solenoid valve (port S)	10.	Spool logic cartridge (port LC2)
3.	Orifice (0.063) (port OR)	7.	Solenoid coil	11.	Spool logic cartridge (port LC1)
4.	#8 zero leak plug with O-ring	8.	Nut

NOTE: The ports on the manifold are marked for easy

identification of components. Example: S is the deck so- lenoid valve and P1 is the gear pump connection port. (See Hydraulic Schematic in Chapter 9 -- Foldout Draw- ings to identify the function of the hydraulic lines and car- tridge valves at each port location).

The control manifolds for the three (3) cutting deck sec- tions are very similar. The front deck control manifold does not include an orifice (item 3).

IMPORTANT: When servicing the deck control man- ifolds, DO NOT interchange parts from one control manifold to another.

Hydraulic System Page 4 -- 120 Groundsmaster 4100--D