Transport / 4WD Switch
The transport/4WD switch is used to set the machine traction speed for transport or mow. The transport/4WD rocker switch is located on the control console next to the operator seat (Fig. 21).
Testing
The switch terminals are shown in Figure 22. The circuit- ry of the switches is shown in the chart below. With the use of a multimeter (ohms setting), the switch functions may be tested to determine whether continuity exists between the various terminals for each position. Verify continuity between switch terminals.
SWITCH | NORMAL | OTHER |
POSITION | CIRCUITS | CIRCUITS |
|
|
|
TRANSPORT | 2 + 3 | 5 + 6 |
|
|
|
MOW | 1 + 2 | 4 + 5 |
|
|
|
1
2
| Figure 21 |
1. Control console | 2. Transport/4WD switch |
4 | 5 | 6 |
1 | 2 | 3 |
BACK OF TRANSPORT / 4WD SWITCH
Figure 22
System
Electrical
Groundsmaster | Page 5 | Electrical System |
