General Information

CAUTION

Never install or work on the cutting deck or lift arms with the engine running. Always stop en- gine and remove ignition key first.

Operator’s Manual

The Operator’s Manual provides information regarding the operation, general maintenance, adjustments and maintenance intervals for your Groundsmaster cutting deck. Refer to that publication for additional information when servicing the machine.

Castor Wheel Tire Pressure

Castor tires on the cutting deck should be inflated to 50 PSI (345 kPa).

Blade Stopping Time

The blades of the cutting deck should come to a com- plete stop in approximately (5) seconds after the cutting deck engagement switch is shut down.

NOTE: Make sure the deck is lowered onto a clean sec- tion of turf or hard surface to avoid dust and debris.

To verify blade stopping stopping time, have a second person stand back from the deck at least 20 feet and watch one of the cutting deck blades. Have the operator shut the cutting deck down and record the time it takes for the blades to come to a complete stop. If this stopping time is excessive, the braking valve(s) (RV2) on the hy- draulic deck control manifold(s) may need adjustment.

Cutting Deck

Groundsmaster 4100--D

Page 8 -- 3

Cutting Deck

Page 257
Image 257
Toro 4100-D service manual Castor Wheel Tire Pressure, Blade Stopping Time