Toro 4100-D service manual General Run and Transport Problems

Problem	Possible Causes
Engine cranks, but does not start.	Engine is not cranking fast enough.
	The engine run solenoid or circuit wiring is faulty.
	The fuel pump is faulty.
	An engine problem exists (see Chapter 3 -- Kubota
	Engine).
Starter cranks, but should not when the traction pedal	The traction neutral switch is out of adjustment.
is depressed.	The traction neutral switch or circuit wiring is faulty.

General Run and Transport Problems

Engine continues to run, but should not, when the	The engine run solenoid is stuck or is faulty.
ignition switch is turned off.	The ignition switch or circuit wiring is faulty.
Engine continues to run, but should not, when the	The seat switch or circuit wiring is faulty.
traction pedal is engaged with no operator in the seat.	The traction neutral switch or circuit wiring is faulty.
The engine stops during operation, but is able to	The operator is lifting off the seat switch.
restart.	The seat switch or circuit wiring is faulty.
	The engine shutdown delay is faulty.
	The ignition switch or circuit wiring is faulty.
The engine kills when the traction pedal is depressed.	The operator is lifting off the seat as the pedal is
	depressed.
	The seat switch or circuit wiring is faulty.
Battery does not charge.	Loose, corroded or broken wire(s).
	The fusible link to the battery is faulty.
	The charge indicator lamp is faulty or burned out.
	The charge indicator lamp wiring is loose, corroded or
	damaged.
	The battery is faulty.
	The alternator is faulty.

Electrical System Page 5 -- 6 Groundsmaster 4100--D