Toro 4100-D service manual Counterbalance Manifold

Counterbalance Manifold

				12		16
						15
						10
						13
			9	5		14
						1
RIGHT						2
FRONT						3
	10					4
	11	10	8	9	6	5
				7

Figure 94

1.	Counterbalance hydraulic manifold	7.	Lock nut (2 used)	12.	Cap screw (2 used)
2.	Valve plate	8.	Hydraulic fitting (2 used)	13.	90o hydraulic fitting
3.	Flat washer (2 used)	9.	O-ring	14.	O-ring
4.	Cap screw (2 used)	10.	O-ring	15.	Test nipple
5.	Isolator (4 used)	11.	90o hydraulic fitting (4 used)	16.	Dust cap
6.	Flat washer (2 used)

NOTE: The ports on the manifold are marked for easy

identification of components. Example: C1 is the con- nection port from the LH deck lift cylinder and CHG is the charge circuit connection (See Hydraulic Schematic in Chapter 9 -- Foldout Drawings to identify the function of the hydraulic lines and cartridge valves at each port).

Hydraulic System Page 4 -- 134 Groundsmaster 4100--D