NOTE: Most of the seat suspension components can be serviced with the seat suspension base mounted to the frame platform. If the air spring assembly (item 6) re- quires removal, the seat suspension base will have to be removed from the seat platform.
Disassembly (Fig. 9)
1.Remove operator seat from seat suspension (see Operator Seat Removal in this section).
2.If the air spring assembly (item 6) or base plate (item 37) requires removal, remove seat suspension from seat platform (see Operator Seat Removal in this sec- tion).
3.Remove seat suspension components as needed using Figure 9 as a guide.
Assembly (Fig. 9)
1.Install all removed seat suspension components us- ing Figure 9 as a guide.
2.Install seat suspension if it was removed from seat platform (see Operator Seat Installation in this section):
3.Install operator seat to seat suspension (see Opera- tor Seat Installation in this section).
4.Make sure that seat electrical connectors are se- cured to machine wire harness (Fig. 10).
1 
2
3
|
| Figure 10 |
1. | Operator seat | 3. Suspension connector |
2. | Seat switch connector | |
Chassis
Groundsmaster | Page 7 | Chassis |
