Toro 4100-D service manual General Information, Operator’s Manual, Stopping the Engine

General Information

This Chapter gives information about specifications and repair of the diesel engine used in the Groundsmaster 4100--D.

General maintenance procedures are described in your Operator’s Manual. Information on engine troubleshoot- ing, testing, disassembly and reassembly is identified in the Kubota Workshop Manual, Diesel Engine, V2403--M--T--E3B that is included at the end of this sec- tion.

Most repairs and adjustments require tools which are commonly available in many service shops. Special

tools are described in the Kubota Workshop Manual, Diesel Engine, V2403--M--T--E3B. The use of some spe- cialized test equipment is explained. However, the cost of the test equipment and the specialized nature of some repairs may dictate that the work be done at an en- gine repair facility.

Service and repair parts for Kubota engines are sup- plied through your Authorized Toro Distributor. If no parts list is available, be prepared to provide your distrib- utor with the Toro model and serial number of your ma- chine.

Operator’s Manual

The Operator’s Manual provides information regarding the operation, general maintenance and maintenance intervals for your Groundsmaster machine. Refer to that publication for additional information when servicing the machine.

Stopping the Engine

IMPORTANT: Before stopping the engine after mowing or full load operation, cool the turbo-char- ger by allowing the engine to run at low idle speed for 5 minutes. Failure to do so may lead to turbo- charger trouble.

Kubota Diesel Engine Page 3 -- 2 Groundsmaster 4100--D