Special Tools
Order these special tools from your Toro Distributor.
Hydraulic Pressure Test Kit
Use to take various pressure readings for diagnostic tests. Quick disconnect fittings provided attach directly to mating fittings on machine test ports without tools. A high pressure hose is provided for remote readings. Contains one each: 1000 PSI (70 Bar), 5000 PSI (350 Bar) and 10000 PSI (700 Bar) gauges. Use gauges as recommended in Testing section of this chapter.
Toro Part Number: TOR47009
Figure 16
Hydraulic Tester (Pressure and Flow)
This tester requires
1. | INLET HOSE: Hose connected from the system cir- |
| |
cuit to the inlet side of the hydraulic tester. |
| ||
2. | LOAD VALVE: A simulated working load is created |
| |
in the circuit by turning the valve to restrict flow. |
| ||
3. | PRESSURE GAUGE: Glycerine filled 0 to 5000 PSI |
| |
gauge to provide operating circuit pressure. |
| ||
4. | FLOW METER: This meter measures actual oil flow |
| |
in the operating circuit with a gauge rated from 1 to 15 | Figure 17 | ||
GPM (5 to 55 LPM). | |||
| |||
5.OUTLET HOSE: A hose from the outlet side of the hydraulic tester connects to the hydraulic system circuit.
6.FITTINGS: An assortment of hydraulic fittings are in- cluded with this kit.
Toro Part Number: TOR214678
Hydraulic System | Page 4 | Groundsmaster |
