Toro 4100-D service manual Fan Drive Manifold

Fan Drive Manifold

				3	4			6		7
							5
				2						8
				1						9
				25
								5
									10
	7	10	5	26						7
4				27						11
23
7				5						7
		14
22										12
		20						7
7									13
21		19		18		15	5	14
					16
				17
RIGHT
FRONT				24

Figure 75

1.	Fan drive manifold	10.	Hydraulic fitting	19.	90o hydraulic fitting
2.	O-ring	11. Hydraulic hose		20.	Hydraulic hose
3.	Test fitting	12.	Hydraulic hose	21.	Hydraulic hose
4.	Dust cap (2 used)	13.	90o hydraulic fitting	22.	Hydraulic tee fitting
5.	O-ring	14.	90o hydraulic fitting (2 used)	23.	Hydraulic test fitting
6.	45o hydraulic fitting (2 used)	15.	Cap screw (2 used)	24.	Oil filter assembly
7.	O-ring	16.	Lock washer (2 used)	25.	Cap screw (2 used)
8.	Hydraulic hose	17.	Hydraulic hose	26.	Flat washer (2 used)
9.	Hydraulic hose	18.	O-ring	27.	Manifold mount

NOTE: The ports on the manifold are marked for easy

identification of components. Example: P1 and P2 are gear pump connection ports and S1 is the solenoid valve port (See Hydraulic Schematic in Chapter 9 -- Foldout Drawings to identify the function of the hydraulic lines and cartridge valves at each port).

Hydraulic System Page 4 -- 108 Groundsmaster 4100--D