Deck Rollers and Skids
9 | 7 |
|
|
10 | 6 |
| |
|
| ||
|
| 5 |
|
8 |
|
|
|
7 |
|
|
|
6 |
| 5 | 7 |
5 |
| ||
|
|
| 6 |
RIGHT | 4 |
|
|
| 3 |
|
|
FRONT | 2 |
|
|
| 1 |
|
|
Figure 23
1. | Roller | 5. | Lock nut |
2. | Flange head screw | 6. | Roller |
3. | Roller shaft | 7. | Cap screw |
4.Flange nut
Removal (Fig. 23)
1.Remove skids and rollers from deck using Figure 23 as a guide.
8.Flange nut
9.Skid (RH shown)
10.Flange head screw
Installation (Fig. 23)
1.Install skids to deck using Figure 23 as a guide. Make sure to install skids in the same mounting hole height position (lower or upper).
2.When installing roller (item 6), install cap screw with the threads orientated toward the centerline of the deck. Install and tighten lock nut until roller will not rotate, then loosen lock nut only enough to allow roller to rotate free- ly. Make sure to install all deck rollers in the same mount- ing hole height position (lower or upper).
Cutting Deck | Page 8 | Groundsmaster |
