The Single Digital Telephone Grand Tour | LED Indicators |
|
|
Table 11 | Fixed Button Definitions | |
|
|
|
Button |
| Definitions |
Line |
| Used to answer and place calls. This button is your [PDN]. It is not an Exchange line |
|
| button. Also used to program Voice Mail ID codes and Call Forwarding. |
|
|
|
Cnf/Trn |
| Used for conference and transfer calls (see “Call Park Orbits” on Page 126 and |
|
| “Conference Calls” on Page 129). |
|
|
|
Hold |
| Used to hold internal or outside calls. Also used for Exclusive hold. See “Hold” on |
|
| Page 135. |
|
|
|
Msg |
| The message button is used to call back the station or voice mail device that |
| activated the LED (see “Message Waiting” on Page 136). | |
|
| |
|
|
|
Vol▲ |
| Adjusts volume levels (“Volume Controls” on Page 11). |
Vol▼ |
| |
|
| |
|
|
|
LED Indicators
The Line button has an LED that flashes at varying rates to indicate line or call status (see Table 12). The Msg button’s LED indicates a message is waiting.
Table 12 | LED Indicators |
|
| |
|
|
|
| |
| Use | Your Station | Other Station | |
|
|
| ||
| Interval Rates |
| ||
|
|
| ||
|
|
|
| |
Line In Use (access outside line) | 2 seconds on, 1/8 second off— | steady | ||
1/8 second ON/OFF | ||||
|
|
| ||
|
|
| ||
Incoming Call (while ringing) | 1 second on at 10 pulses/second— 1 second OFF | one second ON/OFF | ||
|
|
|
| |
Hold (outside line) | 4 pulses/second for 1/8 second ON/OFF | 1/2 second | ||
ON/OFF | ||||
|
|
| ||
|
|
| ||
Hold – Consultation (during consultation/ | 10 pulses/second | steady | ||
transfer to another station) | ||||
|
| |||
|
|
| ||
Hold – Exclusive (outside line) | 10 pulses/second | steady | ||
|
|
| ||
Hold – Recall (when held call recalls your | 1 second at 2 pulses/second, 1 second at 10 | flashes | ||
idle station) |
| pulses/second | ||
|
| |||
|
|
| ||
Hold – Exclusive Recall | 1 second at 2 pulses/second, 1 second at 10 | steady | ||
|
| pulses/second | ||
|
|
| ||
|
|
|
| |
Strata CT Digital Telephone User Guide November 2001 | 109 |
