Toshiba DKT2510-FSD, DKT2520-FS manual Speed Dial, To answer an incoming call using speakerphone

Speed Dial Features

➤To answer an incoming call using speakerphone

1.With the handset on-hook, press the Line or [DN] with the flashing LED.

2.Speak at a normal voice level toward the telephone.

3.Press Spkr to disconnect the call.

The Line or [DN] LED flashes green (in-use) and you are connected to the call.

Speed Dial

Speed Dial enables you to call a telephone number with a brief access code. There are two types of Speed Dial numbers:

♦Station – assigned by individual station users to their own station and can only be dialled from the station that assigns it.

♦System – only assigned from attendant consoles or a designated station (typically the System Administrator’s station), and can be used by other stations. (See System Administrator User Guide for storing instructions.)

Important! If you do not perform the following procedures within a specified time (set in system programming for either one or three minutes) when storing speed dial numbers, the operation times out and your telephone returns to idle mode.

64 Strata CT Digital Telephone User Guide November 2001