Toshiba DKT2520-FS manual Speed Dial Pause and Flash/Recall Storage, Speed Dial Number Linking

Features Speed Dial–Advanced Features

Speed Dial Pause and Flash/Recall Storage

Some Speed Dial numbers may require a pause (long or regular) or hookflash be included (e.g., tone delay requires a pause at the beginning of a Speed Dial number).

Hookflash	Regular Pause	Long Pause
The Flash/Recall button stores a	The pause is either 1.5 or 3 seconds (set	Ten-second pause, which can be
flash signal only if Spd Dial Pause	in system programming). The LCD	entered anywhere in the Speed
is programmed as a flexible button on	displays “P-”.	Dial number. The LCD displays
the telephone. The flash signal is 0.5	Press Spd Dial Pause	“L-”.
or 2 seconds long (set in system		Press Spd Dial Lng Pause.
programming) and is displayed on the	...or if Spd Dial Pause is not on the
LCD as “F-”.	telephone, press Flash/Recall to store
Press Flash/Recall	a pause.
...or enter the hookflash/recall dial
code (Cnf/Trn + #45).

Speed Dial Number Linking

You can link any of the Station Speed Dial numbers to System Speed Dial codes or to any of the optional buttons associated with these codes. This enables up to 36 digits to be stored under one Station Speed Dial button or code.

The number directly stored in the System Speed Dial number dials out first, then the number linked to it. Typically, a company’s special carrier access telephone numbers are stored as part of the digit string.

Note A designated station can be used to link System Speed Dial codes. See the System Administrator’s User Guide.

Important! Before linking Speed Dial Numbers, make sure the System Administrator has stored the desired number in the System Speed Dial you plan on using.

Strata CT Digital Telephone User Guide November 2001 69