Toshiba DKT2510-FSD, DKT2520-FS manual Fixed Buttons, Fixed Button Definitions Cnf/Trn, Hold

Buttons The Digital Telephone Grand Tour

Buttons

There are two sets of buttons, fixed and flexible. The fixed buttons (e.g., Mic, Msg, Redial, Hold, Conf/Trn, Vol▲ , and Vol▼) are standard to every Strata DK 2500-series telephone (see Table 1).

The flexible buttons consist of Directory Number (Primary, Secondary, Phantom) and feature buttons. The number of preprogrammed flexible buttons varies by telephone.

Fixed Buttons

The fixed buttons are located on your dial pad and enable you to perform standard functions quickly and easily.

Table 1	Fixed Button Definitions
Button		Definitions
Cnf/Trn		Press to set up conference and transfer calls (see “Conference Calls” on Page
(Conference/
		41).
Transfer)
		Press once to hold internal or outside calls. The
			HOLD LINE 10
		Line LED flashes green at the internal hold rate.
			JAN 01 SUN 12:19
		...or press twice to enable Exclusive Hold. The Line
		LED flashes green at the exclusive hold rate.
		Exclusive Hold enables you to place a call on hold so that only you or
		somebody using a Call Pickup code at another station can retrieve it.
Hold		To retrieve a call on hold:
		Press Line or [DN] which is on hold
		...or if the call is on Exclusive Hold, from another station dial #5 plus your
		[DN], or dial #5#7 plus the Exchange line number (001~200) that the call is
		held on.
		If a call is not retrieved by a certain time (set in
			HOLD LINE 201
		system programming), it recalls back to your
			LINE 10 RECALL
		phone. You hear repeated recall tone (or if you are
		on the phone, you hear recall tone twice).

4 Strata CT Digital Telephone User Guide November 2001