Single Line Digital Telephone Features | Conference Calls |
|
|
➤To pick up a call that is ringing in another group
1.Lift the handset
...or lift the handset and press Line.
2.Enter #5 + the group pickup access code (#320~#339).
You hear dial tone.
You are connected to the call after dialling the group access code. If the called station belongs to more than one group, any of the Group Pickup codes associated with those groups will pick up the call.
Note These group pickup access codes can be entered into a speed dial location for easier access.
Conference Calls
Strata CT enables you to participate in a variety of conference calls:
♦Up to four stations (including your own) may be conferenced on internal lines.
♦Up to three stations (including your own) may be conferenced with one Exchange line.
♦Up to two stations (including your own) may be conferenced with two Exchange lines.
Step 1: Make a Conference Call or Tandem Two Exchange Lines
1.While on either an external call or internal call, press Cnf/Trn.
2.If you want to add an outside line, dial the Exchange line access code.
3.Dial the telephone number that you want to add to the call
...or dial the internal station number.
You hear internal dial tone and the call is placed on hold. You will not hear the held party again until Step 4.
See Table 14 on page 156 for Exchange line access codes.
You hear dial tone when the line is accessed. (Up to two Exchange lines can be conferenced.)
Strata CT Digital Telephone User Guide November 2001 | 129 |
