![](/images/new-backgrounds/1236424/236424341x1.webp)
Digital Telephone Access Codes | A |
|
|
This appendix contains access codes for outside Speed Dial numbers, Exchange lines, Paging Group and Paging Zone Codes.
Exchange Line Access Codes
Exchange lines are used when you dial an outside number. If your telephone does not have a CO or Line button, you can enter the appropriate code listed in Table 14 to access an outside line.
You can also store the code on a Speed Dial (SD) button for
Exchange line access code onto a Speed Dial code, enter 44 before the Exchange access code (e.g., to store code 7001, enter 447001).
In some systems, 9 is used as a general group code or to access Least Cost Routing (LCR). System users are required to dial 9 in order to access an outside line. If you press 9 in a system programmed with LCR, you may not hear internal dial tone, depending on system programming.
See your System Administrator for the code which applies to your telephone.
➤To access a line
➤Press [PDN] + Exchange Line Access Code
Strata CT Digital Telephone User Guide November 2001 | 155 |