Microphone Cut-Off

Features

 

 

3. Press Spkr.

The Msg LED on your telephone turns OFF. The Msg or [PhDN/MW] LED on the called telephone flashes until the called party presses the flashing Msg or [PhDN/MW].

SENT 203

JAN 01 SUN 12: 19

To cancel a message light set on another station

Press [DN] and dial #64 plus the [PDN] or [PhDN] that has the message light set.

Microphone Cut-Off

This feature prevents callers from monitoring the sounds near your telephone when your telephone receives a Handsfree Call or cuts-off the telephone microphone while on a speakerphone call. When the feature is ON, the Microphn Cut-off LED lights steady red and the Mic and Spkr LEDs do not

light when your telephone is called. When the feature is OFF, the Microphn Cut-off LED is not lit and your microphone works. The Microphn Cut-offfunctions on Handsfree Answerback and speaker

OCA calls for privacy.

To turn the microphone ON/OFF

Press Microphn Cut-offto toggle between ON/OFF.

Off-hook Call Announce (OCA)

This feature enables you to call and speak through either the handset or the speaker of an off-hook, busy digital telephone. The called station must be set in system programming for this feature to work.

The calling station can be set in system programming for OCA to occur automatically when calling a busy-off-hook station or by dialling an access code after receiving busy tone. Automatic OCA only functions on Voice First Signalling systems. The following procedure covers both calling options.

Handset Off-hook Call Announce (HS-OCA)– lets callers make an announcement through the handset (or headset). No special hardware is required.

54

Strata CT Digital Telephone User Guide November 2001

Page 70
Image 70
Toshiba DKT2510-FS manual Microphone Cut-Off, Off-hook Call Announce OCA, To cancel a message light set on another station