Message Waiting | Single Line Digital Telephone Features |
|
|
Retrieve a Call on Exclusive Hold
➤Press Line again.
If a call is not retrieved by a certain time (set in system programming), it recalls back to your phone. You hear repeated recall tone (or if you are on the phone, you hear recall tone twice).
If the held party hangs up, the call is released and the Exchange provides a
Message Waiting
If your station is idle or busy on a call while another station tries to contact you, the calling station can turn on the message waiting LED on your telephone. Your Message Waiting lamp flashes when there is a message.
When you respond by pressing Msg, you will either hear a voice message or your phone will dial the telephone which set a callback message. Voice mail devices and stations can leave message waiting indications.
Up to four Message Waiting indications can be left at a station at one time. One of the indications is for the Message Centre.
➤To answer a Message Waiting light
1.Lift the handset and press Msg. You hear dial tone after lifting the handset.
...or lift the handset and press Line Your phone rings the device that set the indication. If there is | |
+ #408. | no answer, hang up and try later. (The LED continues to |
| flash.) |
2. If your telephone calls a busy | The LED continues to flash. |
station or there is no answer, hang |
|
up and try later. |
|
...or you can bypass this message |
|
and listen to the next message by |
|
going |
|
1 and 2. |
|
136 | Strata CT Digital Telephone User Guide November 2001 |
