Toshiba DKT2520-FSD, DKT2510-FSD Transfer to an Idle Station, Call Transfer with Camp-on, 151

Add-on Module/DSS Console Features

Transfer to an Idle Station

You can transfer internal or outside calls to an idle station from either a DSS console or a DADM.

➤To transfer a call to an idle station

1.Press [DSS] corresponding to the station to be called.

2.Announce the call.

3.Hang up.

4.If the station does not answer before a period set in system programming, the call recalls your station.

The call is placed automatically on hold. The Line or [DN] LED flashes green at double the on-hold rate, and the [DSS] LED flashes green.

You hear a single-ring tone. (If using the Tone signalling mode, you hear successive ring tones.)

With Tone signalling, you would have to wait for the called station to answer before announcing the call.

The call rings the called station when you hang up. While the called station is ringing, the [DSS] LED is steady red, and the Line LED flashes green at the on-hold rate or if on a [DN] button, it goes idle.

When the called station answers the call, the [DSS] LED stays steady red, and the Line LED becomes steady red.

Call Transfer with Camp-on

You can transfer a call to a busy station from either a DSS console or an DADM. Use the [DSS] to transfer the call, even though the [DSS] LED associated with the station you are “transferring to” is red.

Strata CT Digital Telephone User Guide November 2001 151