Toshiba DKT2510-FSD Call Answering Exchange Line, Speed Dial, To transfer call to a busy station

Features Add-on Module/DSS Console

➤To transfer call to a busy station

1.Press [DSS] corresponding to the busy station to be called.

2.Hang up.

You may hear a busy tone. The original caller is placed automatically on hold. The Line or [DN] LED flashes green at double the on-hold rate, and the [DSS] LED remains steady red.

The call rings the called station once with the camp-on tone. While the called station is receiving this tone, the Line LED flashes green (on-hold rate) or if you are on a [DN] button, it goes idle. The [DSS] LED remains steady red.

When the called station answers the transferred call, the Line LED becomes steady red. The [DSS] LED remains steady red.

Note If the busy station is in the DND mode, the call will not transfer, but will recall your telephone immediately.

If the call is not answered after a specified Recall time set in system programming, camp-on is cancelled and the transferred call rings back.

Call Answering (Exchange Line)

If your DADM or DSS console is equipped with a Line button, you can answer Exchange line calls from the DADM or DSS console as you would from a digital telephone. See Chapter 2 – Features for detailed information.

➤To answer an incoming Exchange Line call to a DADM or DSS Console

➤Press the flashing Line.

Speed Dial

Your DADM or DSS console may be equipped with SD (Speed Dial) buttons that can be programmed to dial telephone numbers or to access features. SD buttons on either the DADM or DSS console function like SD buttons on digital telephones. See Chapter 2 – Features for information.

152 Strata CT Digital Telephone User Guide November 2001