Visioneer MFC7050C owner manual 12-12, Retrieve Fax

	Remote Commands			Operation Details
96		Retrieve Fax
		1	Memory Status List	Enter the fax number where the report or
				stored fax messages will be received. (See
		2	Retrieve all Faxes	page 12-13.)
		3	Erase Fax from Memory	If you hear one long beep, you can erase the
				fax message from the memory.
97	Check Receiving Status			You can check whether your MFC has
				received any FAX or VOICE messages. If
		1	FAX	yes, you will hear one long beep. If no, you
				will hear three short beeps.
		2	VOICE
98	Change Answer Mode			If you hear one long beep, you can change
				the answer mode. If you hear three short
		1	MSG CTR	beeps, you cannot change it. (For example:
				When there is no MSG CTR OGM and you
		2	FAX/TEL	tried to change to MSG CTR mode.)
		3	FAX
90	Exit			After a long beep, you can exit remote
				retrieval.

12-12 M E S S A G E C E N T E R