![](/images/new-backgrounds/1267249/26724983x1.webp)
Multi-Line Connections (PBX)
Most offices use a central telephone system. While it is often relatively simple to connect the machine to a key system or a PBX (Private Branch Exchange), we suggest that you contact the company that installed your telephone system and ask them to connect the MFC for you. It is advisable to have a separate line for the MFC. You can then leave the MFC in FAX mode to receive faxes any time of day or night.
If the MFC is to be connected to a
As with all fax units, this machine must be connected to a two wire system. If your line has more than two wires, proper connection of the MFC cannot be made.
If you are installing the MFC to work with a PBX:
1It is not guaranteed that the unit will operate correctly under all circumstances with a PBX. Any cases of difficulty should be reported first to the company that handles your PBX.
2If all incoming calls will be answered by a switchboard operator, it is recommended that the Answer Mode be set to MANUAL. All incoming calls should initially be regarded as telephone calls.
3The unit may be used with either pulse or tone dialing telephone service.
Custom Features on a Single Line
To learn how custom features may affect your faxing operations, please see “Troubleshooting and Maintenance,” page
2 | M F C S E T U P A N D C O N N E C T I O N S |
|
|