Visioneer MFC7050C owner manual Load Paper Press Start KEY, 24-18

See

Aligning Ink

Cartridges

p. 2-13

DID YOU CHANGE?

RIGHT:1.YES 2.NO

9 Press 1 if you replaced the right-side cartridge— OR—

press 2 if you replaced the left-side cartridge and go to Step 13.

The MFC uses your responses to set the ink dot counter for the new ink cartridge, so the MFC can warn you when it is low or empty.

		DID	YOU	INSTALL?
		1.BLACK		2.PHOTO
10 Press	1	if you replaced the Black ink cartridge and go to
Step 11—		OR—press	2 if you installed the Photo ink cartridge
and go to Step 12.
		DID	YOU	INSTALL?
		BLACK:1.NEW2.OLD
11 Press	1	if you installed a new Black ink cartridge—				OR—
press	2	if you installed the old Black ink cartridge. Go to
Step 14.
		DID	YOU	INSTALL?
		PHOTO:1.NEW2.OLD
12 Press	1	if you installed a new Photo ink cartridge—				OR—
press	2	if you installed the old Photo ink cartridge.
		DID	YOU	CHANGE?
		LEFT:1.YES 2.NO
13 Press	1	if you replaced the left-side cartridge— OR—
press	2	if you did not replace the left-side cartridge.
		DID	YOU	INSTALL?
		COLOR:1.NEW2.OLD
14 Press	1	that you installed a new Color ink cartridge— OR—
press	2	if you installed the old Color ink cartridge.
		ALIGNMENT
		LOAD	PAPER		AND
		PRESS START			KEY

15 Make sure paper is in the paper cassette, then press Start .

The Alignment Test Sheet prints with instructions for checking and changing the alignment of the ink cartridges. If needed, adjust the alignment.

24-18 T R O U B L E S H O O T I N G A N D M A I N T E N A N C E