Visioneer MFC7050C owner manual Access Codes and Credit Card Numbers, Hold, Pause

See

Storing

One Touch Dial

Numbers

p. 8-1

Access Codes and Credit Card Numbers

Sometimes you may want to choose from among several long distance carriers when you make a call. Rates may vary depending upon the time and destination. To take advantage of low rates, you can store the access codes or long-distance carriers as One Touch numbers. You can store these long dialing sequences by dividing them and setting them up on separate keys in any combination. You can even include manual dialing using the dial pad. The combined number will be dialed in the order you entered it. as soon as you press Start .

You can store “555” on One Touch key	03	and “7000” on One
Touch key 02 . If you press One Touch	03 ,	02 , and Start , you can

dial “555-7000”. To temporarily change a number, you can substitute part of the number with manual dialing using the dial pad. For example, to change the number to “555-7001” you could press One Touch 03 and press 7 , 0 , 0 , 1 using the dialing pad.

If you must wait for another dial tone at any point in the dialing sequence, store a pause at that point in the number by pressing Redial/Pause . Each key press adds a 3.5 second delay.

WARNING

You can set up phone credit card numbers the same way. However, when using combined dialing, do NOT send a cover page because your credit card number will be on it!

Hold

1 Press Hold to put a call on Hold.

2 You can replace the handset without disconnecting the call.

3 Pick up the MFC handset to release the call from Hold. Picking up an extension handset will not release the call from Hold.

Pause

Press Redial/Pause to insert a 3.5 second pause between numbers. If you are dialing overseas, you can press Redial/Pause as many times as needed to increase the length of the pause.

Dialing

T E L E P H O N E O P E R A T I O N 9-3