
Real Time Transmission
When Memory is full, the MFC cannot continue scanning documents into memory before sending. However, you can turn on REALTIME TX. Then place the documents in the feeder and enter the fax number. As soon as the phone line is free, the MFC starts dialing and sending the fax.
1
2
3
Place the document in the feeder.
Press Function , 1 , 3 , 7 .
To change the default setting, press or
to select ON (or OFF) and press Set . Go to Step 5—
transmission only, press or
to select NEXT FAX ONLY and press Set .
REALTIME TX:OFF?
SELECT 
& SET
4For the next fax only, press or
to select ON (or OFF) and press Set .
ACCEPTED
OTHER SETTINGS?
1.YES 2.NO
5 Press 1 if you want to select additional settings. The display returns to the SETUP SEND menu—
6 Enter the fax number and press Start .
Checking Job Status
You can check which jobs are in memory waiting to be sent. Press Function , 1 , 4 to check it.
S E T U P S E N D | |
|
|