Visioneer MFC7050C Setting Maximum Time for Incoming Messages, Setting Toll Saver, 12-7

See

Setting

Ring Delay

p. 6-3

To erase messages all at once

1 Press Erase .

ERASE ALL VOICE?

SELECT <- -> & SET

2 Press or to select erasing all voice messages (VOICE), all document messages (FAX), or all messages—both voice and fax—( MSG) and press Set .

3 Press 1 to erase — OR—Press 2 to cancel.

Setting Maximum Time for Incoming Messages

Your MFC comes set to receive voice messages up to 30 seconds long. You can change this setting to any length from 20 seconds to 60 seconds, in 5-second increments.

1Press Function , 1 , 7 , 4 .

MESSAGE	30 SEC?
SELECT	& SET

2 Press or to select the maximum time for incoming messages and press Set .

3 Press Stop to exit.

Setting Toll Saver

When you set the toll saver feature, the MFC answers after four rings if you don’t have messages, and after two rings if you do have messages. This way, when you call the MFC, if it rings three times, you know you have no messages, and can hang up, avoiding a toll charge.

When Toll Saver is ON, it overrides your Ring Delay setting. Toll Saver must be OFF for the MFC to use the Ring Delay setting.

1	Press Function ,	1 , 2 , 1 .
2	Press or	to select TOLL SAVER (or RING DELAY) and
	press Set .

3 Press or to select ON and press Set . 4 Press Stop to exit.

Message Center

M E S S A G E C E N T E R 12-7