
Introduction
Communication Methods
The PV100S communicates system status information to the user using the following methods.
•The Front Panel Control Unit (UFCU) Display
•PC Connection (Direct or Remote) - Xantrex Solar Graphic User Interface (GUI) Software required. Communication with a PC requires the selection of one of the following options.
•Remote Connection
•POTS Connection
•Wireless Connection
•Ethernet LAN Connection
•Direct Connection
Important: The customer is responsible for providing the appropriate support service to support a PC connection. (i.e., making arrangements for an analog phone line, data line, wireless service or local area network.)
Universal Front Panel Control Unit (UFCU)
The UFCU keypad is located on the front of the Main Inverter Enclosure to manipulate and view system operation and status.
The keypad is comprised of 20
Communications Enclosure
LCD Display
Universal Front Panel
Control Unit (UFCU)
Figure 1-9 LCD Display and UFCU Location
See “UFCU Keypad Operation and LCD Display” on page
152379 Rev C |