Operation
Commanding Goal State Changes
To change the Goal State:
1.From the standard display press the <MENU> key. This will prompt the user for a password. The LCD will change the third line of the display to “Type and Hit ENTER” and fourth line of the display to “Password:”.
2.Enter the password <5><9><4> and press the <ENTER> button.
The LCD will change the third line of the display to “Hit ENTER to set” and fourth line of the display to “Goal:”.
3.Press <ENTER> again. The Goal State menu will show on the LCD display.
4.Scroll through the goal state menu with the /\ or \/ keys until the desired goal state is displayed on the fourth line of the display.
5.Press <ENTER>. The LCD will then prompt the user by displaying the following text on the third line: “Press F4 to Confirm”.
6.Press <F4> and the PV100S will transition to this goal state. If the goal state requested violates the conditions of the state machine, the PV100S will remain in the previous state of operation.
SHUTDOWN |
|
|
| MATRIX |
|
|
| TEST | |
Inverter = |
| Manual |
| Inverter = |
|
|
| ||
Disabled |
|
|
| Idle |
FAULT
Automatic
POWER |
|
|
| MANUAL |
TRACKING |
|
|
| CURRENT |
Inverter = |
| Manual |
| Inverter = |
|
|
| ||
PV Power |
|
|
| PV Current |
Figure 2-7 State Transition Diagram
152379 Rev C |
