Xerox M118i, C118 manual Connector LINE, Connector TEL, Document Feeder, Duplex Kit, Tray 1 to

Models: M118 C118 M118i

1 116
Download 116 pages 21.86 Kb
Page 30
Image 30
Connector (LINE)

2 Product Overview

Connector (LINE)

Located on the right-hand side of the machine. Connect a telephone cable to this jack. Then connect the other end to the wall jack.

Connector (TEL)

Located on the right-hand side of the machine. Connect a telephone to this jack if required.

Document Feeder

There are two types of document feeder for the machine. One type is the ADF (Automatic Document Feeder) which provides single-sided scanning, the other type is the DADF (Duplex Automatic Document Feeder) which enables both sides of the document to be scanned automatically.

Duplex Kit

Allows you to make double-sided copies.

For more information on how to make double-sided copies, refer to 2 Sided in the Copy chapter on page 54.

Tray 1 to 4

Tray 1 is standard equipment and can hold a maximum of 250 sheets of 80 g/m2 (20lb) paper. Tray 2, 3, and 4 are options and similar to Tray 1. These trays can hold a maximum of 500 sheets of 80 g/m2 (20lb) paper. Tray 2 is required to install Tray 3 and 4.

Center Output Tray

Delivers the printouts face down in this tray.

Tray 5 (Bypass Tray)

Allows you to load custom size paper as well as standard paper. Also load other types of sheets in this tray, such as transparencies and labels that cannot be loaded in Tray 1. To load paper manually, open Tray 5 (bypass tray).

28

Xerox CopyCentre/WorkCentre 118 Quick Reference Guide

Page 30
Image 30
Xerox M118i Connector LINE, Connector TEL, Document Feeder, Duplex Kit, Tray 1 to, Center Output Tray, Tray 5 Bypass Tray