2 Product Overview

Before using the machine, press the <TEST> button. If the GFI is working properly, the <RESET> button should pop up. If it does, press the <RESET> button.

<TEST>

button

<RESET>

button

NOTE: If the <RESET> button pops back up when you press it, or if power is not restored by this procedure, contact the Xerox Welcome Center.

Power Saver Modes

The machine has energy saving features that significantly reduce the power consumption during inactivity. The <Power Saver> button is located on the upper-right position of the control panel, and lights up when the power saving feature is enabled. The power saving feature operates in the following two modes.

Low Power Mode

Sleep Mode

<Power Saver> light/button

NOTE: If the active tray runs out of paper when printing and remains untouched, or the tray is pulled out from the machine and remains out, the power saving feature does not operate.

Low Power Mode

The machine automatically switches into the Low Power Mode after a specified period of time from the last copy, fax, scan, or print operation. In this mode, the screen is turned off, and the Power Saver light is on. The Low Power Mode is canceled when the <Power Saver> button on the control panel is pressed, or a fax or print job is received by the machine. The factory default setting of 14 minutes is customer changeable within the range of 1 to 60 minutes.

For more information, refer to Power Saver in the Setups chapter on User Guide.

32

Xerox CopyCentre/WorkCentre 118 Quick Reference Guide

Page 34
Image 34
Xerox M118i, C118 manual Power Saver Modes, Low Power Mode