Xerox C118, M118i manual Code, Description and Corrective Action

	Fault Codes
Code	Description and Corrective Action
016-730	An unsupported command was detected. To print again, check the print
	data and delete the command that caused the error.
016-732	The form specified in the emulation setting is not registered in the host
	computer. Resend the form data.
016-744	The machine could not print the PDF file because it contains features
	not supported in the machine. Open the file in Adobe Reader and select
	[Print] from the [File] menu to print it.
016-749	A PJL command syntax error occurred. Check the print settings, or
	correct the PJL command.
016-751	The machine could not print the PDF file using ContentsBridge Utility.
	Open the file in Adobe Reader and select [Print] from the [File] menu to
	print it.
016-752	The machine could not print the PDF file using the ContentsBridge utility
	because of insufficient memory. Change the print mode in
	ContentsBridge as follows and try again.
	• If the high quality mode is selected, change it to the standard mode.
	• If the standard mode is selected, change it to the high speed mode.
016-753	A password entered for the direct print is incorrect. Enter a password
	correctly.
016-754	The machine could not print the PDF file because it contains objects that
	are compressed using the LZW algorithm.
	Print the file using the following methods.
	• Open the file in Adobe Reader and select [Print] from the [File] menu.
	• Use the PostScript feature.
016-755	The machine could not print the PDF file because it does not allow
	printing. Open the file in Adobe Acrobat (not Adobe Reader) and
	deselect the [No Printing] check box in the document security settings,
	and print again.
016-757	The password entered is incorrect. Enter the correct password.
016-758	The account is not authorized for copying. Contact the Key Operator.
016-759	The maximum number of copies has been reached. Contact the Key
	Operator.
016-760	An error occurred during PostScript processing. Take one of the
	following actions.
	• Set for optimized speed in the print driver.
	• Increase the size of the print page buffer.
	• Increase PostScript memory.
016-761	An error occurred during image processing. Set for optimized speed in
	the print driver and try again. If this does not fix the problem, set for
	highest compatibility to ensure printing and try again.

Xerox CopyCentre/WorkCentre 118 Quick Reference Guide 105