Loading Paper

6.Close the paper tray.

Paper can be loaded either short edge feed or long edge feed.

Short edge feed

Long edge feed

(SEF)

(LEF)

Tray 5 (Bypass Tray)

Tray 5 (bypass tray) allows you to use a variety of paper sizes and types, including envelopes. Tray 5 (bypass tray) is located on the left-hand side of the machine. A tray extension is provided to accommodate larger sized paper. After loading paper stock other than envelopes in Tray 5 (bypass tray), the screen that allows you to select paper size and type is displayed. Specify the paper size and type to match the size and type of stock loaded. If they do not match, reprogramming is required. For more information about programming Tray 5 (bypass tray), refer to [Paper Size] screen in the Copy chapter on page 51.

NOTE: To reduce unnecessary fuser and paper jams, it is important that the programmed paper size and type is identical to the paper stock loaded.

1. Load the paper neatly into Tray 5 (bypass tray), making sure that the paper stack is in the center of the tray, and that the print side is facing downward. Tray 5 (bypass tray) can hold up to a 10 mm stack of paper.

NOTE: Do not load paper above the maximum fill line.

NOTE: When making single/double sided

copies on perforated paper, load the paper to feed the opposite side of the perforated side edge first. Feeding the perforated side edge first might cause paper jams.

NOTE: When making copies or printing on thick-stock paper and the paper is not fed into the machine, apply a curl to the leading edge of the paper as shown in the figure on the right. Note, however, that excessively bending or folder the paper might cause paper jams.

NOTE: When loading envelopes, make sure the flaps are closed, and that the envelopes

are oriented on the tray so that the flaps are face up and will enter the machine first. However, when loading C5-size envelopes, set the LEF so that the edge with the flaps is facing toward you.

Xerox CopyCentre/WorkCentre 118 Quick Reference Guide

71

Page 73
Image 73
Xerox M118i, C118 manual Tray 5 Bypass Tray