Xerox C118, M118i manual Changing the Default Time Settings, Sleep Mode

Changing the Default Time Settings

Sleep Mode

The machine automatically switches to the Sleep Mode after the Low Power Mode continues for a specified period of time. The Sleep Mode has a reduced power consumption compared to the Low Power Mode. In this mode, the screen is turned off, and the Power Saver light is on. The Sleep Mode is cancelled when the <Power Saver> button is pressed, or a fax or print job is received by the machine. The factory default setting of 1 minute is customer changeable within the range of 1 to 239 minutes.

For more information, refer to Power Saver in the Setups chapter on User Guide.

Changing the Default Time Settings

This section describes how to change the default time settings such as Auto Clear, Power Saver, and Scanning Timer. For more information, refer to Timer Settings in the Setups chapter on User Guide.

1.Press the <Log In/Out> button on the control panel.

<Log In/Out> button

2.Select [System Settings] using the <Select> button.

3.Enter the Key Operator password using the numeric keypad on the control panel.

NOTE: The default Key Operator password is “11111”.

4.Select [Confirm] using the <Select> button, or press the <Enter> button.

5.Select [Common Settings] on the [System Settings] screen using the <Select> button.

6.Press the <Enter> button.

7.Select [Timer Settings] on the [Common Settings] screen using the <Select> button.

8.Press the <Enter> button.

Xerox CopyCentre/WorkCentre 118 Quick Reference Guide 33