Section 5.
Installation Using 723 Belt
Clip (Optional)
An optional belt clip is available to further enhance the portability feature of the Model 725 Monitor. This expands the use of the monitor when operators need to be highly mobile as in an electronic manufacturing environment. Simply attach the belt clip with female snap connector to the male snap connector on the monitor bottom cover. Slide the clip over your belt in a convenient place, so that the wrist strap ground cord will not interfere with normal body movements when attached to the monitor. Attach the dual conductor ground clip to a suitable ground
at the work location. During mobility, attach the dual conductor ground clip to the parking clip on the Model 725 Monitor
(See Section 6).
Section 6.
Parking Clip
Fig.5
A parking clip is supplied with the Model 725 Monitor allowing mobile users to silence the ground clip disconnect alarm. Attaching the dual conductor ground clip to the parking clip prevents unnecessary disconnecting/connecting of the wrist strap ground cord from the input jack during mobility. An added benefit of this feature is that it extends the life of the dual conductor ground cord plug and the monitor’s input jack. The parking clip is already attached to the mounting tab of the Model 725 Monitor. If the Model 725 is to be mounted under a work bench for permanent use, remove the parking clip from the Model 725 Monitor using a small screwdriver.
Section 7.
Battery Replacement
Fig. 6
When only the red lamp illuminates on the Model 725 Monitor, it is time to change the battery. Unplug the wrist strap ground cord from the 725 Monitor jack before proceeding.
8