Logging In to Your Telephone | 49 |
In this case, use the following steps to log in to your phone:
1Press Program + 5 + 4.
For phones without a Program button, press Feature + 410 + 5 + 4.
The Display Panel shows:
Local Phone Number:
2Enter your extension and press #.
If the Display Panel shows a previously assigned number that you want to replace, press the middle soft button under the Display Panel to move the cursor back one space. Repeat as necessary and then enter your extension and press #.
The Display Panel shows:
Enter Password:
3Enter your password and press #.
Alternatively to set a password locally, you can use the Password Stored Locally feature code (434), then enter the password. You can use this method in place of step 1 above. See Chapter 6 for information on feature codes.
Changing Your You can change your password through the VCX User Interface (see Password Chapter 8). This changes your password on the VCX call processor.
However, your password is also stored locally on your telephone. Changing your password through the VCX User Interface does not change the password stored on the phone. You must use the Telephone User Interface (TUI) and change the local password to match the password stored on the call processor by following these steps:
1Press Program + 5 + 5.
For phones without a Program button, press Feature 410 + 5 + 5.
The Display Panel shows:
Enter Password:
2Enter your new password and press #.
The VCX call processor periodically communicates with each VCX telephone. If you change your password through the VCX User Interface but do not change it through the TUI, the VCX call processor detects a password mismatch and logs you out. If this happens, follow steps 1 and 2 to log in.
