78CHAPTER 7: STANDARD FEATURES

If you have not enabled this feature code, you can send a call that is ringing (and all subsequent calls) to your voice mailbox by pressing Feature + 440.

To disable this feature, press Feature + 440. All calls ring normally.

Transferring a Call

You can transfer a connected call directly to another subscriber’s voice

to Another User’s

mail rather than that subscriber’s phone extension. The subscriber can be

Voice Mail

located locally or at a remote site.

To transfer a call to another subscriber’s voice mail:

1While on a call, press Feature + 441.

The Display Panel shows the following prompt:

Transfer VMail Number:

2Enter the extension of the subscriber whose mailbox will receive the call and press #.

The caller hears the mailbox greeting of the target subscriber but the subscriber’s phone does not ring.

Alternatively, you can use the following procedure:

1While on a call, press Transfer.

2Enter the transfer to another subscriber’s voice mail feature code in the following format:

*441*<extension>

For <extension>, you can either enter the phone extension of the recipient, press a speed dial button mapped to that extension, or press a bridge line button (Basic phones do not support bridging) mapped to that extension.

3Press the Transfer button again, then hang up.

For example, extension 1001 calls extension 1000. Extension 1000 wants to transfer the call to the voice mailbox of extension 1002. In this case, extension 1000 performs the following steps:

Presses Transfer.

Enters *441*1002.

Presses Transfer.

Page 78
Image 78
3Com VCX V7000 manual Transferring a Call, To Another User’s, Voice Mail, Located locally or at a remote site