3Com VCX V7000 manual Terminating Calls, Using, Telephone Display, Panel

Terminating Calls 53

For example, the telephone in a conference room may be configured to prevent long-distance telephone calls. You may, however, need to place a long-distance call during a meeting. If the permissions included with the Class of Service on your phone allow long-distance calling, you can use the Class of Service Override feature to apply your phone features to the conference room phone for one call only.

To activate the one-call-only Class of Service Override from any VCX telephone:

1Pick up the handset.

2Press Feature + 433. The Display Panel prompts you for the required input.

3Enter your telephone extension.

4Enter your password and press #.

5Enter the destination number as you would from your own VCX telephone.

When you use Class of Service (CoS) Override, any reports that are generated on the VCX system indicate that the CoS features of your own VCX telephone were applied temporarily to the telephone on which you made the call.

Terminating Calls	You can terminate a call (hang up) by replacing the handset. Alternatively,
	depending on your phone model, you can press the Release button, or if
	the call is on Speaker, turn the Speaker off by pressing the Speaker
	button.
Using the	The Display Panel shows the current date and time, and your extension
Telephone Display	number. It can also show features that you have enabled. For example, if
Panel	you enable the feature that forwards all incoming calls to your voice
	mailbox, the Display Panel shows Fwd Voice Mail.
	The Display Panel can also list telephone status messages, Caller ID
	information (if enabled), and the number of new messages (voice, e-mail,
	and fax) that you have in your mailbox.
	If the Display Panel contains more than two lines of information, use the
	up and down scroll buttons to navigate through the display.