![](/images/backgrounds/133787/bg10a.png)
Chapter 15: Quality of Service
266 Section II: Advanced Operations
The selected traffic class is displayed in the Modify Traffic Class menu.
An example is shown in Figure 98.
Figure 98. Modify Traffic Class Menu
6. Modify the settings as needed. For parameter definitions, refer to
“Creating a Traffic Class” on page 261.
When you modify a traffic class, note the following:
You cannot change the traffic class ID number.
To delete a value from a variable so as to leave it blank, select the
variable and then use the backspace key to delete its default
value.
Specifying an invalid value for a parameter that already has a
value causes the parameter to revert to its default value.
7. Type M to select Modify Traffic Class.
8. To modify another traffic class, repeat this procedure starting with step
4. To assign the traffic class to a policy, go to “Managing Policies” on
page 271.
9. To permanently save your change, return to the Main Menu and type S
to select Save Configuration Changes.
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Modify Traffic Class
1 - Traffic Class ID .......... 11
2 - Description ............... Video2
3 - Exceed Action ............. Drop
4 - Exceed Remark Value ....... 0
5 - DSCP value ................ 0
6 - Max bandwidth ............. 0
7 - Burst Size ................ 0
8 - Priority .................. 0
9 - Remark Priority ........... No
A - ToS .......................
B - Move ToS to Priority ...... No
D - Move Priority to ToS ...... No
E - Flow Group List ........... 6
M - Modify Traffic Class
R - Return to Previous Menu
Enter your selection?