Chapter 18: IGMP Snooping
300 Section III: IGMP Snooping, MLD Snooping, and RRP Snooping
Enabling or Disabling IGMP Snooping
To activate or deactivate IGMP snooping on the switch, perform the
following procedure:
1. From the Main Menu, type 6 to select Advanced Configuration.
The Advanced Configuration menu is shown in Figure 118 on page
296.
2. From the Advanced Configuration menu, type 2 to select IGMP
Snooping Configuration.
The IGMP Snooping Configuration menu is shown in Figure 119 on
page 297.
3. From the IGMP Snooping Configuration menu, type 1 to select IGMP
Snooping Status.
The following prompt is displayed:
IGMP Snooping Status (E-Enabled, D-Disabled) :
4. Type E to enable IGMP or D to disable it. The default setting is
disabled.
A change to the status of IGMP snooping is immediately implemented
on the switch:
5. To permanently save your change, return to the Main Menu and type S
to select Save Configuration Changes.