AT-S63 Management Software Menus User’s Guide
Section I: Basic Operations 79
Resetting the Port Configuration to the Default Settings
You can return the parameters settings of a port to the default values.
To reset a port’s settings to the default settings, perform the following
procedure:
1. From the Main Menu, type 1 to select Port Configuration.
The Port Configuration menu is shown in Figure 13 on page 62.
2. From the Port Configuration menu, type 1 to select Port Configuration.
The following prompt is displayed:
Enter port-list ->
3. Enter the number of the port to be reset to its default settings. You can
reset more than one port at a time. You can specify the ports
individually (for example, 5,7,22), as a range (for example, 18-23), or
both (for example 1,5,14-22).
The Port Configuration menu is shown in Figure 15 on page 65.
4. From the Port Configuration menu, type D to select Set Port
Configuration to Defaults.