Chapter 16: Denial of Service Defenses
280 Section II: Advanced Operations
Configuring Denial of Service Defense
To configure DoS defense, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
2. From the Security Configuration menu, type 3 to select Denial of
Service (DoS).
The Denial of Service (DoS) menu is shown in Figure 107.
Figure 107. Denial of Service (DoS) Menu
3. If you are implementing the Smurf or Land defense, you must provide
the IP address of a node connected to the switch and a subnet mask.
For the Land defense, you must also specify an uplink port. To do this,
complete the following steps. Otherwise, go to step 4.
a. Type 1 to select LAN IP Subnet. The LAN IP Subnet menu is
shown in Figure 108.
Figure 108. LAN IP Subnet Menu
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Denial of Service (DoS)
1 - LAN IP Subnet
2 - SYN Flood Configuration
3 - Smurf Configuration
4 - Land Configuration
5 - Teardrop Configuration
6 - Ping of Death Configuration
7 - IP Option Configuration
R - Return to Previous Menu
Enter your selection?
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
LAN IP Subnet
1 - IP Address ................. 0.0.0.0
2 - Subnet Mask ................ 0.0.0.0
3 - Uplink Port ................ 24
R - Return to Previous Menu
Enter your selection?