Allied Telesis AT-9400

Chapter 34: PKI Certificates and SSL

620 Section IX: Management Security

The Modify Certificate menu is shown in Figure 231.

Figure 231. Modify Certificate Menu

Note

You cannot change selection 1, Certificate Name.

7. Type 2 to select State. The possible settings are:

Trusted

This value indicates you have verified that the certificate is from a

trusted CA. This is the default.

Untrusted

This value indicates the certificate is from an untrusted CA either

because you have not verified the CA or you have verified the CA is

untrusted.

8. Type 3 to select Type. The possible settings are:

The certificate was issued by a CA, such as VeriSign. This is the

default.

The certificate belongs to a CA.

Self

This certificate is a self-signed certificate. The switch treats this type of

certificate as its own.

9. Type 4 to select Modify Certificate.

Your changes are implement in the certificate.

The following message is displayed:

Please wait while certificate is updated...Done.

Allied Telesis AT-9424T/SP - AT-S63

Marketing

User: Manager 11:20:02 02-Mar-2005

Modify Certificate

1 - Certificate Name................. Switch12

2 - State ........................... Trusted

3 - Type ............................ Self

4 - Modify Certificate

R - Return to Previous Menu

Enter your selection?