AT-S63 Management Software Menus User’s Guide
Section IV: SNMPv3 341
The Configure SNMPv3 Access Table menu is shown in Figure 131.
Figure 131. Configure SNMPv3 Access Table Menu
3. To create a group in the SNMPv3 Access Table, type 1 to select Create
SNMPv3 Table Entry.
The following prompt is displayed:
Enter Group Name:
4. Enter a descriptive name of the group. The Group Name can consist of
up to 32 alphanumeric characters.
The Group Name can consist of up to 32 alphanumeric characters.
You are not required to enter a unique value here because the
SNMPv3 Access Table entry is index with the Group Name, Security
Model, and Security Level parameter values. However, unique group
names allow you to more easily distinguish the groups.
There are four default values for this field:
defaultV1GroupReadOnly
defaultV1GroupReadWrite
defaultV2cGroupReadOnly
defaultV2cGroupReadWrite
These values are reserved for SNMPv1 and SNMPv2c
implementations.
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Configure SNMPv3 Access Table
Group Name .... softwareengineering Security Model . v3
Context Prefix. Security Level . AuthPriv
Read View...... internet Context Match .. Exact
Write View .... tcp Storage Type ... NonVolatile
Notify View ... tcp Row Status ..... Active
1 - Create SNMPv3 Table Entry
2 - Delete SNMPv3 Table Entry
3 - Modify SNMPv3 Table Entry
U - Update Display
R - Return to Previous Menu
Enter your selection?