Avaya 555-245-600 manual IP Telephony network engineering overview

IP Telephony network engineering overview

In the early days of local area networking, network designers used hubs to attach servers and workstations, and routers to segment the network into manageable pieces. Because of the high cost of router interfaces and the inherent limitations of shared-media hubs, network design was generally well done. In recent years, with the rise of switches to segment networks, designers were able to hide certain faults in their networks and still get good performance. As a result, network design was often less than optimal. IP Telephony places new demands on the network. Suboptimal design cannot cope with these demands. Even with switches installed, a company must follow industry best practices to have a properly functioning voice network. Because most users do not tolerate poor voice quality, administrators should implement a well-designed network before they begin IP Telephony pilot programs or deployments.

This section contains network design recommendations in the following topics:

●Overview

●Voice quality

●Best practices

●Common issues

Overview

Industry best practices dictate that a network be designed with consideration of the following factors:

●Reliability and redundancy

●Scalability

●Manageability

●Bandwidth

Voice mandates consideration of the following additional factors when designing a network:

●Delay

●Jitter

●Loss

●Duplex

Issue 6 January 2008 283