LAN switching products
●RMON/SMON port statistics provide
●IP multicast filtering (snooping) filters multicast traffic to optimize network bandwidth.
●Classification of ports as regular or valuable is supported so that if a link fails, notification is generated for valuable ports only.
●The L2 CAM table contains 16K MAC addresses.
Layer 3 features
Note:
An additional license is required for Layer 3 features.
●Static, RIPv1, RIPv2, OSPF IP routing protocols are supported.
●Equal cost routing is used for load balancing and redundancy.
●Router redundancy (VRRP) is supported.
●NetBIOS rebroadcasting is available for applications such as WINS that use broadcasting but may need to also communicate with stations on other subnets or VLANs.
●ICMP and ARP protocols are supported.
●DHCP/BootP relay allows broadcast requests to be forwarded to servers.
●
●The L3 CAM table contains 4K IP addresses.
Management
●Access to the management interfaces are
●You can access to the Command Line Interface (CLI) in the following ways:
-Direct console or modem connection
-Telnet (up to five simultaneous connections) or SSHv2 (up to two simultaneous connections) over the IP network
●You can use TFTP for the download/upload of configuration files or the download of firmware files
●You can use SCP (Secure Copy Protocol) for secure download/upload of configuration files
●You can use SSH encrypted login sessions as a secure way to manage the switches remotely.
●A
●SNMPv1 is supported.