Greenfield configurations

As shown in Figure 39: Signaling path (S8700 / G650 configuration) on page 117, an IP Telephone sends all IP Telephony signaling traffic to the C-LAN. The C-LAN multiplexes IP Telephone signaling messages, and sends them to the S8700-series Server through the IPSI.

The connectivity between the endpoint and the server is: Endpoint IP network S8300 Server

Figure 39: Signaling path (S8700 / G650 configuration)

Note:

In the IP-PNC S8700 / G650 configuration each Port Network has an IPSI circuit pack.

As Figure 40: Media flow path (S8700 IP-PNC configuration) on page 118 shows, an IP Telephone sends all media streams to the Media Processor board. Once a call is established, if the remote endpoint is another IP Telephone, the media stream might shuffle (be redirected to the other endpoint) without requiring Media Processor resources. Media Processors are also used to transport media streams in IP tie trunks.

Issue 6 January 2008 117

Page 117
Image 117
Avaya 555-245-600 manual Signaling path S8700 / G650 configuration