Avaya Application Solutions
Partially configured systems
For a partially configured system, a Standard profile is selected or a Custom profile is created that contains some of the provisioning data. The profile contains a section for dynamic data, which is either missing and needs to be added or is temporary and needs to be confirmed or changed. The partially configured profile is either loaded onto the i40 or i120 Distributed Office module or copied to a USB portable storage device before shipment to the branch location.
A
From-scratch configuration
If none of the profiles, including the default profile, is appropriate, the system can be reset to its initial configuration by executing the nvram init command. In this case the Initial Setup Assistant is used to enter the minimum provisioning data to make the system operable. Then the remaining provisioning data is entered using Local Manager.
