Compact T1 - Release 6.1 5-125
CLI Commands
set
set (router) mgcp tos
Use the set (router) mgcp tos command to configure the IP TOS byte value to be sent in
each transmitted MGCP packet. This command takes effect immediately.
Syntax: set {cmg_card-addr} mgcp tos {value}
Example: set 1 mgcp tos 0x28
The example will set the IP TOS value to 0x28 on the CMG in slot 1.
{cmg_card-addr}
The slot number (1-6) that contains the CMG card.
{value}
IP TOS byte value, in the format of 0x (2 hex digits). Default setting is 0.
The following table contains the appropriate TOS value for various IP precedence and
Diffuser Code points:
IP Precedence TOS Diffuser Codepoint TOS
IP Precedence = 0 0x00 EF = 101110 0xB8
IP Precedence = 1 0x20 AF11 = 001010 0x28
IP Precedence = 2 0x40 AF12 = 001100 0x30
IP Precedence = 3 0x60 AF13 = 001110 0x38
IP Precedence = 4 0x80 AF21 = 010010 0x48
IP Precedence = 5 0xA0 AF22 = 010100 0x50
IP Precedence = 6 0xC0 AF23 = 010110 0x58
IP Precedence = 7 0xE0 AF31 = 011010 0x68
AF32 = 011100 0x70
AF33 = 011110 0x78
AF31 = 100010 0x88
AF32 = 100100 0x90
AF33 = 100110 0x98