Compact T1 - Release 6.1 5-107
CLI Commands
set
set (router) login prompt
Use the set (router) login prompt command to enable or disable the suppression of the Router
login prompt for a user that telnets in from the Controller CLI. The user level of the current
Controller user will be passed to the Router card at the time the telnet starts. This configuration
allows a single login and authentication at the controller to apply to Router telnet sessions as
well as the usual Controller CLI. This command applies to the IP Router card only.
Syntax: set {rtr_card-addr} login prompt {disable|enable}
Example: set 5 login prompt disable
The example will set disable the login prompt to users that telnet to the Router
in slot 5 from the Controller CLI.
{rtr_card-addr}
The slot number (1-6) that contains the IP Router card.
{disable|enable}
disable Do not present a login prompt to the user that telnets to the Router via
Controller CLI.
enable Present a login prompt to the user that telnets to the Router via Controller
CLI (Default).